• Easy to mix, easy to use & low odor
• 4:1 mixture - resin to hardener by volume
• Long working time fo 2-3 hrs.
• Extended recoat window (>48 hrs.)
• Very fast dry (lacquer dry - dust free, tack free) in 60-90 minutes
• Can be applied by brush, roller or spray equipment

• Seals and bonds to concrete and is the perfect universal primer coat for the entire family of Rhino systems
• May be used as a light duty concrete coating providing superior dust control and good appearance
• Superior wood primer - providing a perfect bond and preventing bubbles and other "out-gassing" issues when over-coated with Rhino Epoxy and Rhino Urethane top coats
• Can be applied directly to properly prepared metal substrates

   

Coverage Rate	150-250 sq. ft. / gal
Solids by Volume	65%
Mixed Viscosity (cps)		200-400
Mixing Ratio	4:1 by volume
Working Time	2-3 hrs
Lacquer Dry (dust free) Time	60-90 minutes
Walk-on Time (light traffic)	4-6 hrs after application
Cure Time (return to service)	Overnight
VOC (grams per liter)	75

 

Thorough and complete mixing is critical. A Jiffy mixer is recommended. Prior to mixing, gently stir each component separately to insure that the material is homogenous and uniform in consistency. Carefully proportion each component at the ratio of 4 parts A (resin) to 1 part B (hardener) by volume or, if using 5-gallon kits, pour all of Part B (hardener) into Part A (resin) and mix at 200 – 300 RPM for 3 – 5 minutes. No stripes or color variation should be visible in the mix.

IMPORTANT: After mixing, wait 10 – 15 minutes before application to allow for the required "induction" of material prior to application. Mix no more material than may be applied in 3 hours.

Primer 1500 is an excellent bonding, light duty, attractive clear protective floor coating, providing superior dust control. It is easily applied by brush or roller. Primer 1500 will not crater or blush, and dries to a high gloss. When using Primer 1500 as a stand alone coating, two coats should be applied. The first coat typically covers 150 – 200 sq ft/gallon (approx. 4 – 5 mils dft). A second coat at 200 – 250 sq ft/gallon (approx. 3 – 4 mils dft) should be applied for best results, allowing 2 – 3 hours between coats and an overnight cure of the final coat before returning the area to service.